3-1/2″ Louver Plantation Shutter Plan Wizard

PLANTATION SHUTTER COMPONENTS
CustomShutters.Guru

Plantation Shutter Plan Wizards

                    The calculators will determine material cut list and create an assembly 
                     plan for your own custom plantation shutters.  As a rule of thumb, deduct 
                     1/8" from each panel joint; hinges, panel joints, top & bottom (2 panel shutter 
                    have a 1/4" overlap) so use the full measurement for width and deduct 1/4" for height.
"Receive with your order of $150 or more our "Plantation Shutter Plan Wizard" Excel Program for your use." 

                                   Measure for Clearance 
  • Measure inside width in 3 places – top, middle, bottom. Measure inside height in 3 places – left, middle, right
  • Use the smallest actual opening measurements
  • Check for square by measuring diagonally – A & B
  • Z Frame or Trim Frame units will accommodate most out-of-square in drywall openings
  • If considering Mounting Strips or hinges only, an inside mount is not feasible if diagonal measurements are not within 1/8th inch. Rather, select the L Frame or go to an outside mount.